12
Power Quality Analyzer Model 8335
2.2 Key Features
• Voltage ratios:
1V to 500kV / Separate or grouped configuration of channels
•
Mixed sensors:
10mA to 60kA depending on sensor. Combine as needed. The
measurements are performed simultaneously using several different current
sensors
•
Transient adjustment level:
Adjustment of 1V or 1A. Separate or grouped
configuration of channels
•
New languages:
In addition to the 21 existing: Japanese, Turkish, Hindi & Thai
•
Measurement of TRMS voltages up to 1000Vrms AC/DC for two, three, four or
five-wire systems
•
Measurement of TRMS currents from 1mA to 6500Arms (sensor dependent)
•
Measurement of DC current up to 1200A
DC
(with MR193 probe)
•
Automatic probe detection and scaling
•
Frequency measurement (40 to 69Hz systems)
•
Direct measurement of neutral current for WYE configurations
•
Record and display trend data as fast as once per second for one month for up
to 25 variables. It is recommended to limit recordings to under 100MB.
•
Energy assessments
•
Transient detection on all V and I inputs
•
Inrush current
•
Calculation of Crest Factors for current and voltage
•
Calculation of the K Factor for transformers
•
Calculation of short-term flicker for voltage
•
Calculation of the phase unbalance for voltage and current (3 phase only)
•
Measurement of harmonic angles and rates (referenced to the fundamental or
RMS value) for voltage, current or power, up to 50th harmonic
•
Display of harmonic sequencing and direction
•
Calculation of overall harmonic distortion factors
•
Real time display of Phasor diagrams including values and phase angles
•
Monitoring of the average value of any parameter, calculated over a period
running from 1 sec to 2 hrs
•
Measurement of active, reactive and apparent power per phase and their
respective sum total
•
Calculation of power factor, displacement power factor and tangent factor
•
Total power from a point in time, chosen by the operator
Shop for AEMC products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
