AEMC 8335 Power Pad User Manual Download Page 93

Page: 93 / 136

Power Quality Analyzer Model 8335

NOTE:

If Autorun is disabled, it will be necessary to open Windows

Explorer, then locate and open the USB stick drive labeled “DataView” to
view the files on the drive.

In the AutoPlay window, select

Open Folder to view Files

Double-click on

Setup.exe

from the opened folder view to launch the Data-

View setup program.

NOTE:

If installing onto a Vista based computer the

User Account Control

dialog box will be displayed. Select the

Allow

option to proceed.

Set-up

window, similar to the one below, will appear.

Figure 6-1

There are several different options to choose from. Some options

(

)

require an

internet connection.

•

DataView, Version x.xx.xxxx

- Installs DataView

onto the PC.

• *

Adobe Reader

- Links to the Adobe

website to download the most

recent version of Adobe

Reader to the computer.

Adobe

Reader is

required for viewing PDF documents supplied with DataView

• *

DataView Updates

- Links to the online DataView

software updates to

check for new software version releases.

• *

Firmware Upgrades

- Links to the online firmware updates to check

for new firmware version releases.

Shop for AEMC products online at:

1.877.766.5412

www.

PowerMeterStore

.ca

Summary of Contents for 8335 Power Pad









































































































































Search results

Summary of Contents for 8335 Power Pad

Reviews:

Related manuals for 8335 Power Pad

Brands by name

Popular brands

AEMC 8335 Power Pad, User Manual

Search results

Summary of Contents for 8335 Power Pad

Reviews:

Related manuals for 8335 Power Pad

Brands by name

Popular brands