ABB SafeMove2 Applications Manual Download Page 159

Page: 159 / 238

6.14 Global supervision functions

About global supervision functions

The default names of the global functions are:

•

Global_ASP for Axis Speed Supervision

•

Global_TSP for Tool Speed Supervision

•

Global_TOR for Tool Orientation Supervision

•

SST for Stand Still Supervision

There can be several global functions of the same type. A number is then added
to the name, for example Global_ASP_1.

To change the name of a function, right-click on the function in the

Visual SafeMove

browser, select

Rename

and type the desired name.

Creating global supervision functions

Note

Action

In the

Visual SafeMove

browser, make

sure that no zone or range is selected.

In the

Visual SafeMove

ribbon, click

Global Functions

and select function.

Configure the function according to

Con-

figure the supervision functions on
page 160

Application manual - Functional safety and SafeMove2

159

3HAC052610-001 Revision: P

6 Configuring SafeMove

6.14 Global supervision functions

Summary of Contents for SafeMove2















































































































































































































































Search results

Summary of Contents for SafeMove2

Reviews:

ABB SafeMove2, Applications Manual, Page: 159 / 238

Search results

Summary of Contents for SafeMove2

Reviews: