ABB SafeMove2, Applications Manual, Page: 151 / 238

Note/illustration Action
xx1500000238
Fill in the parameters for the shape to
specify the position and size of the geo-
metry. 8
Note
The minimum size of a geometry is 50 mm.
Rename a SafeMove tool
To change the name of a tool, right-click on the tool in the SafeMove browser,
select
Rename and type the desired name.
Change default tool
If more than one tool is configured, one of them must be selected as default tool.
The default tool will be used when no tool is selected by input signals.
Select the tool that should be default. Click on the button Make default Tool .
Copying a tool
Note/illustration Action
Right-click on a tool and select Copy . 1
A new tool is created with exactly the same
data as the first tool. The parameter values
can then be adjusted. Right-click on the tool again and select
Paste .
2
Deleting a tool
Action
Right-click on a tool and select Delete object . 1
Application manual - Functional safety and SafeMove2 151
3HAC052610-001 Revision: P
© Copyright 2016-2020 ABB. All rights reserved.
6 Configuring SafeMove
6.10 Configure the tools
Continued