manualshive.com logo in svg

ABB Relion 630 Series, Technical Manual

Share
Download
ABB Relion 630 Series Technical Manual Download Page 41

3.1.2.2 

Functionality

Authority status (ATHSTAT) function is an indication function block for user logon
activity.

3.1.2.3 

Operation principle

Authority status (ATHSTAT) function informs about two events related to the IED
and the user authorization.

•

The fact that at least one user has tried to log on wrongly into the IED and it was
blocked (the output USRBLKED)

•

The fact that at least one user is logged on (the output LOGGEDON)

Whenever one of the two events occurs, the corresponding output (USRBLKED or
LOGGEDON) is activated.

3.1.2.4 

Signals

Table 5:

ATHSTAT Output signals

Name

Type

Description

USRBLKED

BOOLEAN

At least one user is blocked by invalid password

LOGGEDON

BOOLEAN

At least one user is logged on

3.1.2.5 

Settings

The function does not have any parameters available in LHMI or PCM600.

1MRS757256 F

Section 3

Basic functions

PML630/Compact Load-Shedding Solution

35

Technical Manual

Summary of Contents for Relion 630 Series





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands