ABB Relion 630 Series Technical Manual Download Page 35

Page: 35 / 380

Table 2:

Command buttons

Name

Description

Enabling parameter editing.

Disabling parameter editing.

Writing parameters to the device.

Refreshing parameter values.

Committing changes to device's

non-volatile flash memory.

Rejecting changes.

Triggering the disturbance recorder

manually.
Saving the disturbance recording.

Freezing the values so that updates

are not displayed.
Receiving continuous updates to

the monitoring view.
Deleting the disturbance record.

2.6

Authorization

The user categories are predefined for the LHMI and WHMI, each with different
rights.

The IED users can be created, deleted and edited only with PCM600. One user can
belong to one or several user categories.

At delivery, the IED user has full access as SuperUser until users are
created with PCM600. Logging on is not required for the LHMI.

Table 3:

Predefined user categories

Username

User rights

SystemOperator

Control from LHMI, no bypass

ProtectionEngineer

All settings

DesignEngineer

Application configuration

UserAdministrator

User and password administration

1MRS757256 F

Section 2

PML630 overview

PML630/Compact Load-Shedding Solution

Technical Manual

Summary of Contents for Relion 630 Series




























































































































































































































































































































































































Search results

Summary of Contents for Relion 630 Series

Reviews:

Brands by name

Popular brands

ABB Relion 630 Series, Technical Manual

Search results

Summary of Contents for Relion 630 Series

Reviews:

Brands by name

Popular brands