![ABB ACS380 Series Firmware Manual Download Page 355](http://html.mh-extra.com/html/abb/acs380-series/acs380-series_firmware-manual_2560355.webp)
Additional parameter data 355
7
Additional parameter data
Contents
•
Terms and abbreviations
•
Fieldbus addresses
•
Parameter groups 1…9
•
Parameter groups 10…99
Terms and abbreviations
Term
Definition
Actual signal
Signal measured or calculated by the drive. Usually can only be monitored
but not adjusted; some counter-type signals can however be reset.
Analog src
Analog source: the parameter can be set to the value of another parameter
by choosing “Other”, and selecting the source parameter from a list.
In addition to the “Other” selection, the parameter may offer other pre-
selected settings.
Binary src
Binary source: the value of the parameter can be taken from a specific bit
in another parameter value (“Other”). Sometimes the value can be fixed to
0 (false) or 1 (true). In addition, the parameter may offer other pre-selected
settings.
Data
Data parameter.
FbEq32
32-bit fieldbus equivalent: The scaling between the value shown on the
panel and the integer used in communication when a 32-bit value is
selected for transmission to an external system.
The corresponding 16-bit scalings are listed in chapter
Parameters
.
ACS380 FW.book Page 355 Friday, May 4, 2018 4:18 PM
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de