292 Parameters
46.33
Above torque limit
Defines the trigger level for “above limit” indication in
torque control. When actual torque exceeds the limit, bit
10 of
06.17
Drive status word 2
is set.
0.0%
0.0…1600.0%
“Above limit” indication trigger level for torque control.
See par.
46.03
46.41
kWh pulse scaling
Defines the trigger level for the “kWh pulse” on for 50 ms.
The output of the pulse is bit 9 of
05.22
Diagnostic word 3
.
1.000 kWh
0.001…
1000.000 kWh
“kWh pulse” on trigger level.
1 = 1 kWh
47
47 Data storage
Data storage parameters that can be written to and read
from using other parameters’ source and target settings.
Note that there are different storage parameters for
different data types.
See also section
Data storage parameters
(page
107
).
47.01
Data storage 1 real32
Data storage parameter 1.
0.000
-2147483.008…
2147483.008
32-bit data.
-
47.02
Data storage 2 real32
Data storage parameter 2.
0.000
-2147483.008…
2147483.008
32-bit data.
-
47.03
Data storage 3 real32
Data storage parameter 3.
0.000
-2147483.008…
2147483.008
32-bit data.
-
47.04
Data storage 4 real32
Data storage parameter 4.
0.000
-2147483.008…
2147483.008
32-bit data.
-
47.11
Data storage 1 int32
Data storage parameter 9.
0
-2147483648…
2147483647
32-bit data.
-
47.12
Data storage 2 int32
Data storage parameter 10.
0
-2147483648…
2147483647
32-bit data.
-
47.13
Data storage 3 int32
Data storage parameter 11.
0
-2147483648…
2147483647
32-bit data.
-
47.14
Data storage 4 int32
Data storage parameter 12.
0
-2147483648…
2147483647
32-bit data.
-
47.21
Data storage 1 int16
Data storage parameter 17.
0
-32768…32767
16-bit data.
1 = 1
47.22
Data storage 2 int16
Data storage parameter 18.
0
-32768…32767
16-bit data.
1 = 1
47.23
Data storage 3 int16
Data storage parameter 19.
0
-32768…32767
16-bit data.
1 = 1
No.
Name/Value
Description
Default
FbEq 16
ACS380 FW.book Page 292 Friday, May 4, 2018 4:18 PM
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
