128 Parameters
06.21
Drive status word 3
Drive status word 3.
This parameter is read-only.
-
0000h…FFFFh
Drive status word 1.
1 = 1
06.30
MSW bit 11 selection
Selects a binary source whose status is transmitted as bit
11 (User bit 0) of
06.11
Main status word
.
Ext ctrl loc
False
0.
0
True
1.
1
Ext ctrl loc
Bit 11 of
06.01 Main control word
.
2
Other [bit]
Source selection (see
Terms and abbreviations
).
-
06.31
MSW bit 12 selection
Selects a binary source whose status is transmitted as bit
12 (User bit 1) of
06.11
Main status word
.
Ext run
enable
False
0.
0
True
1.
1
Ext run enable
Status of the external run enable signal (see parameter
20.12
Run enable 1 source
).
2
Other [bit]
Source selection (see
Terms and abbreviations
).
-
06.32
MSW bit 13 selection
Selects a binary source whose status is transmitted as bit
13 (User bit 2) of
06.11
Main status word
.
False
False
0.
0
True
1.
1
Other [bit]
Source selection (see
Terms and abbreviations
).
-
06.33
MSW bit 14 selection
Selects a binary source whose status is transmitted as bit
14 (User bit 3) of
06.11
Main status word
.
False
False
0.
0
True
1.
1
Other [bit]
Source selection (see
Terms and abbreviations
).
-
07
07 System info
Drive hardware and firmware information.
All parameters in this group are read-only.
07.03
Drive rating id
Type of the drive/inverter unit.
-
07.04
Firmware name
Firmware identification.
-
07.05
Firmware version
Version number of the firmware.
-
07.06
Loading package
name
Name of the firmware loading package.
-
07.07
Loading package
version
Version number of the firmware loading package.
-
No.
Name/Value
Description
Default
FbEq 16
Bit
Name
Description
0
DC hold active
1 = DC hold is active
1
Post-magnetizing
active
1 = Post-magnetizing is active
2
Motor pre-heating
active
1 = Motor pre-heating is active
3…15
Reserved
ACS380 FW.book Page 128 Friday, May 4, 2018 4:18 PM
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
