York YD Mod D Скачать руководство пользователя страница 80

Страница: 80 / 160

Medium voltage variable speed drive screen

Figure 29: Medium voltage variable speed drive screen

This screen displays information about the medium voltage variable speed drive (MVVSD), if

installed. There are two similar screens available: one for VSD 1 and another for VSD 2.

Table 69: Display only fields

Field/LED name

Description

PRV position

Displays the Pre-rotation Vane position as a value between 0 and 100%.

Motor run (LED)

Indicates whether the digital output from the controls is commanding the motor to

RUN.

Motor heater (LED)

Indicates whether the digital output from the controls is commanding the optional

motor heater on. This LED is not displayed if the option is not installed.

% Full Load Amps

Displays the motor current as a percentage of the Full Load Amps (FLA) value.

Pulldown demand time left

Displays the time remaining in the programmed pulldown period if the value is

nonzero.

Output voltage

Displays the output voltage measured to the motor.

Output frequency

Displays the present output frequency to the motor.

Input power

Displays the total kilowatts measured by the VSD or Harmonic Filter, if installed.

KW hours

Displays the cumulative amount of kilowatts used over time as the MVVSD motor

controller operates.

Input voltage

Displays the input voltage to the MVVSD as reported by the MVVSD.

Output current

Displays the average of the 3-phase output current to the motor. Value is provided by

the MVVSD.

DC bus voltage (phase A, B, C)

Displays the three phases of DC bus voltage upper and lower buses.

MVVSD model

Displays the model number as received from the MVVSD.

Motor voltage rating

Displays the voltage rating of the MVVSD as received from the MVVSD. Displayed as

2300 V, 3300 V, or 4160 V. If an invalid value is received, INVALID is displayed and the

chiller will not run.

Model YD Mod D with OptiView Control Center

Содержание YD Mod D

































































































































































Результаты поиска

Содержание YD Mod D

Отзывы:

York YD Mod D, Руководство по эксплуатации, Страница: 80 / 160

Результаты поиска

Содержание YD Mod D

Отзывы: