manualshive.com logo in svg

York YD Mod D, Руководство по эксплуатации, Страница: 6 / 160

Поделиться
Скачать
York YD Mod D Скачать руководство пользователя страница 6

 WARNING

External wiring, unless specified as an optional connection in the manufacturer’s product line, is not

to be connected inside the control cabinet. Devices such as relays, switches, transducers and controls

and any external wiring must not be installed inside the micro panel. All wiring must be in accordance

with Johnson Controls’ published specifications and must be performed only by a qualified electrician.

Johnson Controls will NOT be responsible for damage/problems resulting from improper connections

to the controls or application of improper control signals. Failure to follow this warning will void the

manufacturer’s warranty and cause serious damage to property or personal injury.

Changeability of this document

In complying with Johnson Controls’ policy for continuous product improvement, the information

contained in this document is subject to change without notice. Johnson Controls makes no

commitment to update or provide current information automatically to the manual or product

owner. Updated manuals, if applicable, can be obtained by contacting the nearest Johnson

Controls Service office or accessing the Johnson Controls Knowledge Exchange website at

 https://

docs.johnsoncontrols.com/chillers/

.

It is the responsibility of rigging, lifting, and operating/ service personnel to verify the applicability

of these documents to the equipment. If there is any question regarding the applicability of these

documents, rigging, lifting, and operating/service personnel should verify whether the equipment

has been modified and if current literature is available from the owner of the equipment prior to

performing any work on the chiller.

Revision notes

Revisions made to this document are indicated in the following table. These revisions are to

technical information, and any other changes in spelling, grammar, or formatting are not included.

Affected pages

Description

107

Diagnostics screen added

109

Maintenance screen added

Associated literature

Manual description

Form number

Shipping Damage Claims Policy

50.15-NM

Installation Checklist and Request for Startup Engineer

160.79-CL1

Start-Up Checklist YD Chillers

160.79-CL2

Maintenance Requirements

160.79-MR1

Field Reassembly Instructions for Form 2, 3 and 7 Shipment - YD Mod D

160.79-N1

Wiring Diagram - Field Connections YD - Mod D with OptiView Control and

Water Pump Starter

160.79-PW1

Wiring Diagram - Field Control Modification for YD - Mod D with OptiView

Control

160.79-PW2

Wiring Diagram - Field Connections YD - Mod D with Medium Voltage E-M

Starter

160.79-PW3

Model YD Mod D with OptiView Control Center

6

Содержание YD Mod D

































































































































































Отзывы:

Нет отзывов