manualshive.com logo in svg

York YD Mod D, Руководство по эксплуатации, Страница: 73 / 160

Поделиться
Скачать
York YD Mod D Скачать руководство пользователя страница 73

Table 58: Display only fields

Field/LED name

Description

Oil pump 2: Oil pump run output

(LED)

Illuminates when compressor #2 Variable Speed Oil Pump is being commanded to

run.

Oil pump 2: Pump oil pressure

(HOP)

Displays the high-side oil pressure measured at the compressor #2 bearing input.

Oil pump 2: Oil pressure

Displays the pressure differential between the Pump oil pressure (HOP) transducer

for compressor #2 and the common Sump oil pressure (LOP) transducer. If this

compressor is the lead compressor, includes offset pressure derived from auto-

zeroing during compressor #2 Pre-lube. However, if compressor #1 is the lead

compressor, this value includes offset pressure derived from auto-zeroing during

compressor #1 Pre-lube (refer to auto-zeroing explanation under the Compressor

Screen). If either transducer used to calculate this differential is out of range, the

display field will show XX.X.

Oil pump 2: Oil pump drive

command frequency

Displays the speed command applied to compressor #2 Variable Speed Oil Pump.

Oil pump 2: Setpoint or target oil

pressure

Displays the oil pressure that compressor #2 Variable Speed Oil Pump is controlling

to. During the pre-lube and for the first 15 seconds of System Run, this is the Target

Setpoint and is fixed at 45.0 psid. For the remainder of compressor #2 run, it is the

programmed Setpoint Oil Pressure.

Oil pump 2: Pulldown time

remaining

Displays the time remaining until the user programmed Setpoint Oil Pressure is used.

While this clock is decrementing, the Target Oil Pressure Setpoint (fixed at 45.0 psid) is

in effect.

Oil level (bar graph)

Displays the oil level in the oil sump as a vertical graph. The range of the graph is

0% to 100%. Three colors are used as follows: 0% to 35% - red; >35% to 80% - green;

>80% to 100% - yellow. Only displayed if enabled using the Oil Level Detection (Enable/

Disable) key.

Table 59: Programmable

Button

Access level

Description

Oil level detection

(enable/disable) Service

Enables or disables the Oil Level Detection feature. When enabled, displays the oil level

in the oil sump as a vertical graph.

Table 60: Navigation

Button

Access level

Description

Home

View

Returns to the Home screen.

Oil pump 1

View

Displays a subscreen that allows manual control and programming of the setpoints for

compressor #1 Variable Speed Oil Pump.

Oil pump 2

View

Displays a subscreen that allows manual control and programming of the setpoints for

compressor #2 Variable Speed Oil Pump.

73

Model YD Mod D with OptiView Control Center

Содержание YD Mod D

































































































































































Отзывы:

Нет отзывов