manualshive.com logo in svg

York YD Mod D, Руководство по эксплуатации, Страница: 24 / 160

Поделиться
Скачать
York YD Mod D Скачать руководство пользователя страница 24

Y.OPT.11.xx.yzz:

•

Y – Commercial chiller

•

OPT - Used on Microboard 031-03630-007

•

11 – YD chiller

•

xx - controls revision level (00, 01, etc.)

•

y – language package (0=English only, 1=NEMA, 2=CE, 3=NEMA/CE )

•

zz – language package revision level (00, 01, etc.)

OptiView control center in detail

The OptiView™ Control Center display is highlighted by a full screen graphics display. This display

is nested within a standard keypad, and is surrounded by soft keys, which are redefined based

on the currently displayed screen. Eight buttons are available on the right side of the panel, and

are primarily used for navigation between the system screens. At the base of the display are 5

additional buttons. The area to the right of the keypad is used for data entry with a standard

numeric keypad provided for entry of system setpoints and limits.

Figure 3: OptiiView™ control center

The 

Decimal

 key provides accurate entry of setpoint values.

Use the ± key to enter negative values and select AM/PM during time entry.

In order to accept changes made to the chiller setpoints, use the Check key as a

universal Enter key or Accept symbol.
In order to reject entry of a setpoint or dismiss an entry form, use the 

X

 key as a

universal Cancel symbol.
Use the cursor 

Arrow 

keys to navigate on screens that contain a large amount of

entry data. In addition, use these keys to scroll through history and event logs.

Model YD Mod D with OptiView Control Center

24

Содержание YD Mod D

































































































































































Отзывы:

Нет отзывов