manualshive.com logo in svg

York YD Mod D, Руководство по эксплуатации, Страница: 100 / 160

Поделиться
Скачать
York YD Mod D Скачать руководство пользователя страница 100

User screen

Figure 38: User screen

This screen allows the operator to choose what units of measurement to display parameters in, the

screen languages, and the date format.
Each custom user value is not linked to a specific button. Instead, the 

Change

 button is pressed

which enables the cursor arrows which are used to highlight the custom user parameter the user

wishes to modify. At this point the 

Check

 button is pressed and the value may be entered.

Display only

None

Table 90: Programmable

Button

Access level

Description

Custom user ID

(4)

Service

This allows the user to specify up to four Custom User ID values. Each user ID will

then require a corresponding Password and User Level. A User ID can be defined for

various maintenance personnel. Service Technicians refer to 

Service Manual (Form

160.79-M1)

.

Custom user

password (4)

Service

This allows the user to specify up to four Custom Password values. Each Password

will then require a corresponding User ID and User Level. Service Technicians refer to

Service Manual (Form 160.79-M1)

.

Custom user

access level (4)

Service

This allows the user to specify up to four Custom User Access Levels. Each Access Level

will then require a corresponding Password and User ID. Service Technicians refer to

Service Manual (Form 160.79-M1)

.

System language Operator

Allows the user to define the language for all Screens. The desired language is

selected by scrolling through the list of those available. English is the Default language

and is selected by pressing the Up Arrow key when the dialog box appears during

the selection process. The selected language will not be displayed until after the user

navigates from the USER Screen to another Screen. Available languages are English,

Traditional Chinese, Simplified Chinese, French, Portuguese, Spanish, Italian, German,

Hungarian, and Turkish.

English / metric

units

Operator

Define the unit system (English or Metric) of the display.

Model YD Mod D with OptiView Control Center

100

Содержание YD Mod D

































































































































































Отзывы:

Нет отзывов