York YD Mod D Скачать руководство пользователя страница 27

Страница: 27 / 160

Navigation

In order to maximize the amount of values that the panel can display to the user, and in order

to place those values in context, multiple screens have been designed to describe the chiller

operation. In order to move from one screen to the next, navigation keys have been defined.

These keys allow the user to either move “forward” to a subscreen of the present screen, or move

“backward” to the previous screen. Except for the Home Screen display, the upper-right “soft” key

will always return the user to the Home Screen. Navigating with “soft” keys is as simple as pressing

the key next to the label containing the name of the desired screen. The system will immediately

refresh the display with the graphics for that screen. The following is a layout of all the screens and

how they are connected.

Figure 4: Overview of screen layout

Languages

The Screens can be displayed in various languages. Language selection is done on the USER Screen.

The desired language is selected from those available. Not all languages are available. English is

Model YD Mod D with OptiView Control Center

Содержание YD Mod D

































































































































































Результаты поиска

Содержание YD Mod D

Отзывы:

York YD Mod D, Руководство по эксплуатации, Страница: 27 / 160

Результаты поиска

Содержание YD Mod D

Отзывы: