5.0 INSTALLATION AND FIXING
VL
2
VAL.130.--.M.EN Issue: A1
09.16
25
5.6 Assembly instruction
SUPPLY:
Manual Actuator assembly
A)
1 hand wheel cpl. with spindle
B)
1 nut screw
%ROWVQXWVZDVKHUV
&DUGERDUGER[
NOTE:
During assembly the blade must rest on all bearings. Only after, lay the valve on the lower side for
actuator assembly.
1)
lnsert spindle (
A
) into the central bore on the upper crosspiece of valve body. Screw the nut screw (
B
) onto
the pindle (
A
) by approx. 100 mm.
2)
lnsert the larger washers (
L
) on the inside of the valve frame (
C
) from below and the smaller washers (
M
)
on the hand wheel support (
D
). lnsert the bolts and nuts (
N
).
3)
Tighten the bolts and nuts.
4)
Rotate the hand wheel to match the bores on nut screw (
B
) and on blade (
E
).
