5.0 INSTALLATION AND FIXING
VL
2
VAL.130.--.M.EN Issue: A1
09.16
29
SUPPLY:
C)
1 gear motor actuator
D)
1 nut screw
V)
2 solenoid valves
%ROWVQXWVDQGZDVKHUV
&DUGERDUGER[
NOTE:
During installation the blade has to be supported on all bearings. Only after having checked this, up-
end valve for actuator assembly.
1)
Remove the 4 bolts (
A
) and washers (
B
) from the actuator.
2)
Insert the actuator spindle (
C
) in the central bore on the upper crosspiece of the valve body. Screw the nut
screw (
D
) on the spindle by approx. 100 mm with the greasing nipple (
E
) pointing outside.
3)
Choose the position of actuator (
C
).
4)
Insert the 4 washers (
F
) and bolts (
N
) from below through the upper crosspiece (
H
) in threaded bores of the
actuator.
5)
Tighten the bolts.
6)
Turn the spindle (
C
) by hand until the bores on nut screw (
D
) and those on blade (
Z
) match.
1
2
3
4
5
6
