5.0 INSTALLATION AND FIXING
VL
2
VAL.130.--.M.EN Issue: A1
09.16
24
%HIRUHHQDEOLQJWKHVSHFL¿FDFWXDWRUHQVXUHWKHUHDUHQRVLJQVRIUXVWRQWKHDFWXDWRUVKDIWVDQGUHPRYHDQ\
rust traces.
Grease the shaft and splined bush with conductive lubricating pastes such as adhesive lithium grease contain-
LQJPLFURQL]HGFRSSHUSRZGHU7KH\DUHXVHGVSHFL¿FDOO\IRUOXEULFDWLQJG\QDPLFFRQWDFWVWRIDFLOLWDWHSDVVDJH
of electric current:
- NLGI Consistency: 2;
- Temperature: -35°C/+220°C.
:LWKKLJKHUPDWHULDOFROXPQVLWLVUHFRPPHQGHGWRLQVHUWDEDIÀHSODWHLQVLGHWKHVLORDERYHWKHYDOYH
Check for and remove any possible vibrations of the plant, which may affect the proper working of the valve.
It is the responsibility of the installer, and of any person using the valve:
QRWWRVWDUWLWXQOHVVLWKDVEHHQ¿[HGWRWKHSDUWVRIWKHSODQWSURYLGHGIRUWKHSXUSRVH
QRWWRVWDUWLWLIWKHV\VWHPLQZKLFKLV¿WWHGKDVQRWEHHQFHUWL¿HGLQDFFRUGDQFHZLWKWKHODZVLQIRUFH
- to install a system that prevents harm to persons or damages to property.
Important
After carrying out the installation, check for misalignments and deviations to be corrected.
