Vacon 50X, Руководство пользователя

Страница: 54 / 132

53 vacon
using macro mode and getting a quick start
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
6
6.3 Macro Mode Applications and Included Parameters
The tables below list the different applications and the Level 1 parameters included in the macro for that
application. The Factory Application macro is the core package (listed in Table 17); the other macros
include the Factory Application macro parameters as well as the ones listed in their respective tables
(Tables 18, 19, 20, 21, and 22). The macro mode applications are as follows:
• Factory Application (Table 17)
• Fan Application (Table 18)
• Fan with PI Application (Table 19)
• Pump Application (Table 20)
• Pump with PI Application (Table 21)
• Vector Application (Table 22)
Para. # Parameter Name Default See Page
001 Model Number Read-only 60
010 Last Fault Read-only 60
102 Output Freq Read-only 61
103 Output Voltage Read-only 61
104 Output Current Read-only 61
105 Drive Load Read-only 61
106 Load Torque Read-only 61
107 Drive Temp Read-only 61
111 DC Bus Voltage Read-only 62
201 Input Mode Local Only 62
202 Rev Enable Forward 63
301 Min Frequency 0.0 Hz 67
302 Max Frequency 60.0 Hz 67
303 Preset Freq 1 50 Hz 67
402 Accel Time 1 5.0 sec 68
403 Decel Time 1 5.0 sec 68
502 Voltage Boost 0.0% 72
610 Timed OL Select In Duty 60sec 78
700 Vmet Config Freq Out 79
705 Relay 1 Select Drv Fault 80
706 Relay 2 Select Drive Rdy 80
Table 17:Factory Application Macro
Para. # Parameter Name Default See Page
203 Stop Key Remote Coast 63
204 Ref Select Vin1 63
205 Vin1 Config 0-10 V 64
206 Vin1 Offset 0.00% 64
207 Vin1 Span 100.00% 64
406 DC Inject Config DC at Start 69
501 V/Hz Select Fan Fixed 71
504 Skip Freq Band 0.2 Hz 72
505 Skip Freq 1 0.0 Hz 72
Table 18:Fan Application Macro
(Core Factory Application from Table 17, plus the following parameters)