Vacon 50X, Руководство пользователя

Страница: 83 / 132

vacon 50x parameters vacon 82
24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
7
EMOP+ EMOP increases speed.
EMOP- EMOP decreases speed.
PI Enable Enables PI control.
Ref Switch Switches speed reference signals.
Cur Lim Dis Disables Current Limit mode.
CurLimIMax Set the current limit to Imax
SL Override Takes control away from the serial link.
Seq 1 Sequencer input 1.
Seq 2 Sequencer input 2.
Seq 3 Sequencer input 3.
Seq Dwell Sequencer dwell mode (pause).
Seq Advance Sequencer advance (skip).
FLY Dis Disable Catch-on-fly operation.
This parameter sets the Motor Overload input polarity. The following data values may be
assigned to this parameter:
Parameter Value Description
NC Operate A normally closed (NC) connection allows the unit to operate;
the drive faults when the connection opens.
NO Operate A normally open (NO) connection allows the unit to operate;
the drive faults when the connection closes.
This allow the MOL digital input to be programmable.
Parameter Value Description
Preset 1 Preset Speed Input 1 (PS1).
Preset 2 Preset Speed Input 2 (PS2).
Preset 3 Preset Speed Input 3 (PS3).
Coast Stop Activates a Coast-to-Stop condition.
DC Inject Begins DC injection braking.
Loc/Rem Switches from Local to Remote mode.
Alt Ramp Activates Alternate Ramp.
Fault Reset Resets a fault.
EMOP+ EMOP increases speed.
EMOP- EMOP decreases speed.
PI Enable Enables PI control.
Ref Switch Switches speed reference signals.
Cur Lim Dis Disables Current Limit mode.
CurLimIMax Set the current limit to Imax
SL Override Takes control away from the serial link.
Seq 1 Sequencer input 1.
Seq 2 Sequencer input 2.
Seq 3 Sequencer input 3.
Seq Dwell Sequencer dwell mode (pause).
Seq Advance Sequencer advance (skip).
FLY Dis Disable Catch-on-fly operation.
726 MOL Polarity Default: NO Operate
Range: Text string
Level 2
727 MOL Configure Default = MOL
Range: n/a
Level 2