Vacon 50X, Руководство пользователя

Страница: 114 / 132

113 vacon summary of vacon 50x parameters
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
12
12. Summary of Vacon 50X Parameters
12.1 Default Settings
No. Parameter Name Options Default User Setting See Page
001 Model Number Model Dependent Read-only 60
002 Software Rev 0.00–99.99 Read-only 60
003 Rated Current 0.0–200.0 A Read-only 60
005 Serial No. 1 0–65535 Read-only 60
006 Serial No. 2 0–65535 Read-only 60
010 Last Fault text string Read-only 60
025 4th Fault text string Read-only 60
040 3rd Fault text string Read-only 60
055 2nd Fault text string Read-only 61
070 1st Fault text string Read-only 61
102 Output Freq 0.0–400.0 Hz Read-only 61
103 Output Voltage 0–600 V Read-only 61
104 Output Current 0.0–200.0 A Read-only 61
105 Drive Load –200.0–200.0% Read-only 61
106 Load Torque –200.0–200.0% Read-only 61
107 Drive Temp –20.0–200.0 °C Read-only 61
108 Total Run Time 0.0–6553.5 h Read-only 61
109 Power On Hours 0–65535 h Read-only 62
110 Stator Freq 0.0–400.0 Hz Read-only 62
111 DC Bus Voltage 0–1000 Vdc Read-only 62
115 Drive Power Out 0.0–200.0% Read-only 62
201 Input Mode text string Local Only 62
202 Rev Enable text string Forward 63
203 Stop Key Remote text string Coast 63
204 Ref Select text string Vin1 63
205 Vin1 Config text string 0–10V 64
206 Vin1 Offset 0.0–100.0% 0.00% 64
207 Vin1 Span 10.0–200.0% 100.00% 64
208 Cin Config text string 0–20mA 50 64
209 Cin Offset 0.0–100.0% 0.0% 65
210 Cin Span 10.0–200.0% 100.0% 65
211 Vin2 Config text string 0–10V 65
212 Vin2 Offset 0.0–100.0% 0.00% 65
213 Vin2 Span 10.0–200.0% 100.00% 65
214 Vin1 Filter Time 0–1000 ms 20 ms 66
215 Cin Filter Time 0–1000 ms 20 ms 66
216 Vin2 Filter Time 0–1000 ms 20 ms 66
217 Trim Ref Enable text string Disabled 66
218 Trim % Factor –100.0 to 100.0% 0.0% 66
222 Ref Loss Fault text string Disabled 66
301 Min Frequency 0.0–Max Freq. 0.0 Hz 67
302 Max Frequency 20.0–400.0 Hz 60.0 Hz 67
303 Preset Freq 1 Min Freq–Max Freq 5.0 Hz 67