TransCore MPRX 10-7200-001, Руководство пользователя

Страница: 61 / 138

21 Set Date
#21
sets the date. Enter the date in the proper format: two-digit decimal entries with no
spaces between characters and using forward slashes “/” as delimiters. The entry
format is as follows:
21MM/DD/YY
where
MM
represents the month (01 to 12).
DD
represents the day (01 to 31).
YY
represents the last two digits of the year (00 to 99).
/
is the date delimiter.
Reader response:
#Done
22 Display Time and Date
#22
displays the reader’s current time and date. One space separates the time and the date
output.
Reader response:
HH:MM:SS.hh MM/DD/YY
where
HH
represents hours
MM
represents minutes
SS
represents seconds
hh
represents hundredths of seconds
:
is the time delimiter
MM
represents the month
DD
represents the day
YY
represents the last two digits of the year
/
is the date delimiter
Append Information — Command Group 3
Group 3 commands append useful information to reader transmissions, such as IDs, error messages, and
sensor input reports. Auxiliary information such as reader number, antenna number (or manual entry code),
number of times the previous tag was read, and sensor input status can be appended to the ID using the
Group 3 commands.
30N Append Time and Date Selection
#30N
selects the option of appending the time and date to transmitted IDs, error messages,
presence without tag reports, and input status change reports. The factory default
setting is time and date appended (Command
#302
).
The reader returns an #Error message if its tag buffer contains data. The reset reader
Command #63 may be transmitted to clear the buffer; however, tag ID data will not be
Chapter 5 Commands
TransCore Proprietary 5–61