background image

60900002
60900003

Manual no: 905  En   Rev 1

Service manual - English

Safety information

Visual inspection 

Inspect lift functions regularly. Check to ensure that material is free from damage. 

Before use

Make certain the lift is properly assembled.
Check lifting function and base-width adjustment.
Check driving function in all directions.
Check to ensure that the quick-connecting locking pin for the actuator is correctly installed.
Check sling bar connection and safety latch function.
Check that the accessory (EvaDrive) is properly mounted on the lift.

Always read the user manuals for all assistive devices used during a transfer.
Keep the user manual where it is accessible to users of the product.  
Always make sure that you have the right version of the user manual.
The most recent editions of user manuals are available for downloading from our website, www.handicare.com.
Under no circumstances may a lift with EvaDrive be used by persons who have not received instruction in the operation 
of a lift with the accessory mounted. 
It is strongly prohibited to modify the original product.

Always read the user manual

SWL: 205 kg/450 lbs

270 kg/600 lbs

System

RoMedic

TM

EvaDrive450/600

Содержание SystemRoMedic EvaDrive450






































Отзывы: