Toshiba Strata DK 24, Руководство по установке и обслуживанию

Страница: 93 / 372

4-19
INSTALLATION-CONFIGURATION
SECTION 400-096-204
SEPTEMBER 1992
CONFIGURATION GUIDE, WORKSHEET 5
F. System and Slot Check
1. Add total PCB/slot requirements (from Worksheets 2 ~ 4): AT + BT + CT1 + CT2 + DT + ET +
FT = PCB/slot total.
DK24 with PCTUS1
IMPORTANT NOTE!
One or two additional slots should always be considered for future growth.
2. If total is six or less, use DK24 and PCTUS1 with the following considerations:
a. Total PEKU/PSTU/PESU PCBs combined: three or less (no PEMU equipped).
b. Total PEKU/PSTU/PESU PCBs combined: two or less (PEMU equipped).
c. Total PCOU PCBs: four or less.
d. Total PEMU PCBs: one or less.
e. HDSS consoles: three or less.
f. HDCB controllers: three or less.
g. If using 2000-/3000-/6000-/6005-series electronic telephones and/or a PEMU, use Power
Check, Worksheet 7.
3. If total is six or less, use DK24 and PCTU (1, 2, 3, or 4) with the following considerations:
a. Total PDKU/PEKU/PSTU/PESU PCBs combined: four or less (no PEMU equipped).
b. Total PDKU/PEKU/PSTU/PESU PCBs combined: three or less (PEMU equipped).
c. Total PCOU PCBs: six or less.
d. Total PEMU PCBs: one or less.
e. Combined DDSS and HDSS consoles: four or less.
f. DDCB/HDCB controllers: four or less.
g. If using 2000-/3000-/6000-/6005-series electronic telephones, PDIU-DIs, and/or a
PEMU, use Power Check, Worksheet 7.
DK24 with PCTU1, 2, 3, or 4
4. If total is eight or less, use DK56 and PCTU (1, 2, 3, or 4) with the following considerations:
a. PDKU/PEKU/PSTU/PESU PCBs combined: eight or less.
b. PCOU PCBs: eight or less.
c. PEMU PCBs: two or less.
d. PEMU and PCOU: eight or less.
e. Combined DDSS and HDSS consoles: four or less.
f. DDCB/HDCB controllers: four or less.
g. If using 2000-/3000-/6000-/6005-series electronic telephones, PDIU-DIs, and/or a
PEMU, use Power Check, Worksheet 7.
DK56 with PCTU1, 2, 3, or 4
5. If this total is above eight, use DK96 and PCTU (1, 2, 3, or 4) with the following considerations:
a. PDKU/PEKU/PSTU/PESU PCBs combined: 12 or less.
b. PCOU PCBs: nine or less.
c. PEMU PCBs: three or less.
d. PEMU and PCOU: nine or less.
e. Combined DDSS and HDSS consoles: four or less.
f. DDCB/HDCB controllers: four or less.
g. If using 2000-/3000-/6000-/6005-series electronic telephones, PDIU-DIs, and/or a
PEMU, use Power Check, Worksheet 7.
DK96 with PCTU1, 2, 3, or 4
NOTE:
PDKUs and DDSS s require PCTU3 or PCTU4. DDCBs require PCTU4.