Toshiba Strata DK 24, Руководство по установке и обслуживанию

Страница: 359 / 372

-55-
REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
TABLE RM-BG
PROGRAM 55-2
LCR MODIFIED DIGITS-END
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 55
P55
Enter Program Number 55
3
P55 1
Press
CR
.
5 To Exit Program/Store Data
A)
B)
C)
To store data, press CR .
Continue returning to Step 3 until all data has been entered
for this program.
To exit this program, press
# # CR .
Refer to the System Record Sheet and enter the required
modified digits table number (1 ~ 6).
Example: Enter table number 1, enter
1 .
4
P55 12
1 2 3 4 P3
Enter Code 2
The system will display any previously entered digits (up to 22).
Refer to the System Record Sheet and enter new numbers,
if required.
Example: Enter
1 2 3 4 P 3 .
Enter Modified Digits Table Number
(up to 22 digits)
NOTE: Pause codes may also be entered. To enter pauses,
press "P" plus the pause number (1 ~ 8).
P55 12
1 2 3 4 P3
P55 ##
P
(up to 22 digits)
Special Code Input
Pause
Tone
Clear
=
=
=
P 1 ~ P 8 .
T at beginning of digits to convert.
C
as first digit, then
CR
.