Toshiba Strata DK 24, Руководство по установке и обслуживанию

Страница: 356 / 372

-52-
REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
TABLE RM-BD
PROGRAM 54
LCR ROUTE DEFINITION
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 54
P54
Enter Program Number 54
3
P54 1
Press
CR
.
5
P54 12 11 32
P54 ##
P
To Exit Program/Store Data
A)
B)
C)
To store data, press CR.
Continue returning to Step 3 until all data has been entered
for this program.
To exit this program, press
# # CR .
Refer to the System Record Sheet and enter the required
route plan number (1 ~ 8).
Example: Route plan 1, enter
1 .
4
P54 12 11 32
Enter Route Definition Number
Refer to the System Record Sheet and enter the required
route definition number (1 ~ 4).
Example: Enter route definition number 2, enter
2
.
The system will display the previously entered CO line
group number (1 ~ 8) and the modified digits table number (1 ~ 6).
Refer to the System Record Sheet and enter the CO line
group and modified digit numbers as required, then press
CR .
Example: Change the CO line group number to 3 and the
modified digits table to 2. Enter:
3 2 CR .
Enter Route Plan Number
Modified Digit Table No.
CO Line Group No.
Route Definition No.
Plan No.