Toshiba Strata DK 24, Руководство по установке и обслуживанию

Страница: 345 / 372

-41-
REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
TABLE RM-AN
PROGRAM 45-3 ~ 6
EQUAL ACCESS, SPECIAL COMMON CARRIER NUMBERS & AUTHORIZATION CODE DIGIT LENGTH
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 45
P45
Enter Program Number 45
3
P45 3 NNNNN
P45 4 00 12
P45
Refer to the record sheet and enter the item number (3 ~ 6).
Example: Item 3, enter
3 . The system will display
the present equal access number or EA1 Code.
5
P45 ##
P
Enter code number 4. The system will display present authorization
code digit length. Refer to the System Record Sheet and enter
the required authorization code number digit length.
Example: 12, enter:
1 2 CR .
6 To exit this program, press # # CR .
Press CR .
4 Refer to the System Record Sheet and enter the required number.
Example: 12345, enter
1 2 3 4 5 CR .
P45 3 NNNNN 12345
P45
NOTE:
Items 5 and 6 are entered the same way as 3 and 4, respectively.
TABLE RM-AP
PROGRAM 45-8 ~ 9
TOLL RESTRICTION OVERRIDE CODE
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter the Program Mode
At the >MODE prompt, enter .
PROGCR
2
P 45
P45
Enter the Program Number 45
3
P45 8 NNNN
P45 8 NNNN 1234
P45 ##
P
Refer to the System Record Sheet and enter or for the
desired code number. The system will display the present
override code number. 8
5 To Exit Program/Store Data
Press . CR
4 Refer to the record sheet and enter a new number if required.
Example: 1234. Enter: .
1234
P45 8 NNNN 1234
9
A)
B) To store data, press .
To exit this program, press . CR
##CR