Toshiba Strata DK 24, Руководство по установке и обслуживанию

Страница: 333 / 372

-29-
REMOTE ADMINISTRATION & MAINTENANCE PROCEDURES
SECTION 400-096-600
SEPTEMBER 1992
TABLE RM-Y
PROGRAM 34
HOLD RECALL TIMING
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
Enter the Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 34
P34
Enter Program Number 34
Press
CR .
3
P34 05
Refer to the record sheet and enter the required
port number.
Example: Port 05, enter
0 5 .
4 Press # . The present data will be displayed.
P34 05# 032
5 Refer to the record sheet and enter the required timing.
Example: 160 seconds, enter
1 6 0 .
6
P34 05# 032 160
P34 ##
P
To Exit Program/Store Data
A)
B)
C)
P
P34 05# 032 160
To store data, press CR .
Continue returning to Step 3 until all Program 34
data has been entered.
To exit this program, press
# # CR .
NOTE:
, use Type 2 procedure.
Program 35
TABLE RM-Z
PROGRAM 36
FIXED CALL FORWARD
ACTION STEP DISPLAY/PRINTOUT
1
>MODE PROG
Enter the Program Mode
At the >MODE prompt, enter
P R O G CR .
2
P 36
P36
Enter Program Number 36
Press
CR
.
3
P36 00
Refer to the System Record Sheet and enter the
port number for the station that will have a Fixed
Call Forward button. Example: Port 00, enter
0 0 .
4 Press # . The present data will be displayed. P36 00# NN
5 Refer to the System Record Sheet and enter
the port to be forwarded to when the Fixed
Call Forward button is pressed. Example: Port 04, enter
0 4
.
P
P36 00# NN 04
6
P36 00# NN 04
P36 ##
P
To Exit Program/Store Data
A)
B)
C)
To store data, press CR .
Continue returning to Step 3 until all Program 36
data is entered.
To exit this program, press
# # CR .