manualshive.com logo in svg

Teledyne 400E, Инструкция по эксплуатации, Страница: 52 / 318

Поделиться
Скачать
Teledyne 400E Скачать руководство пользователя страница 52

Optional Hardware and Software 

Model 400E Ozone Analyzer 

Instruction Manual 

 

52 

 

P/N 04316 Rev: B 

 

The ozone output level of the generator is directly controllable by the user via the 

front panel of the instrument or remotely via the analyzer’s RS-232 Serial I/O 

ports. 

See Section 6.4 for instructions on setting the Output level of the ozone 
generator. 
See Section 6.8 & 6.9 for information on configuring this option and using the 
Serial I/O ports. 
See Appendix A.2 for a list of variables used to control this parameter. 
See Section 6.7.4 for information on Calibrating the output of the O

3

 

Generator 

The state of the Sample/Cal valve can also be controlled: 

Manually via the analyzer’s front panel; 
By activating the instrument’s AutoCal feature (See Section 7.6);  
Remotely by using the External Digital I/O Control Inputs (See Section 6.8), 

or; 
Remotely via the RS-232/485 Serial I/O ports (See Section 6.10). 

5.5.

 

O

3

 Generator Reference Detector (Option 53) 

A reference detector can be installed into Model 400E Ozone Analyzers with IZS 

Options that monitors the operating level of the IZS’ ozone generator. The Detector 

senses the intensity of the UV Lamp internal to the IZS generator and coverts this 

into a DC Voltage. This voltage is used by the CPU as part of a feedback loop to 

directly adjust the brightness of the lamp producing a more accurate and stable 

ozone concentration. 

5.6.

 

RS232 Modem Cabling (Option 60) 

This option consists of a cable constructed to allow the analyzer’s RS-232 COM 

Ports to be connected to the most common styles of modems (e.g. US Robotics 

Sportster). It is terminated at one end with a db-9 female connector and at the 

other end with a db-25pin male connector.  

5.7.

 

Multidrop, RS-232 (Option 62) 

The Multidrop Option is used with the serial port to enable communications with 

several instruments over a single RS-232 cable. Additional hardware is required 

(available from the Factory) allowing multiple instruments to be connected to a 

single Serial I/O port. Similar operation can be achieved by using the COM2 port 

configured for RS-485. 

The setup and instructions for use of this mode is covered in the T-API’s Multidrop 

Manual P/N 018420000. 

Содержание 400E































































































































































































































































































































Отзывы:

Нет отзывов