Teledyne 400E Скачать руководство пользователя страница 140

Страница: 140 / 318

Operating Instructions

Model 400E Ozone Analyzer

Instruction Manual

140

P/N 04316 Rev: B

6.10.6.

COM Port Password Security Feature

In order to provide security for applications where the Model 400E is being remotely

accessed via a modem or a public telephone line, the LOGON feature can be set to

require a password to before the instrument will accept commands. This is done by

turning on the

SECURITY MODE

(see Section 6.10.6).

Once the

SECURITY MODE

feature is implemented, the COM port has the following

attributes:

A password is required before the port will operate.

If the port is inactive for 1 hour, it will automatically LOGOFF.

Repeated attempts at logging on with incorrect passwords will cause subsequent

logins (even with the correct password) to be disabled for 1 hour.

If not logged on, the only command that is active is the '?'.

The following messages will be given at logon.

LOG ON SUCCESSFUL - Correct password given

LOG ON FAILED - Password not given or incorrect

LOG OFF SUCCESSFUL - Logged off

To logon to the model 400E analyzer with

SECURITY MODE

feature ON type:

LOGON 940331

940331 is the default password. This password can be changed to any number from

0 to 999999 by the variable RS232_PASS. To change the password enter the

command:

V RS232_PASS=NNNNNN

Where N is any numeral between 0 and 9.

Содержание 400E































































































































































































































































































































Результаты поиска

Содержание 400E

Отзывы:

Teledyne 400E, Инструкция по эксплуатации, Страница: 140 / 318

Результаты поиска

Содержание 400E

Отзывы: