Teledyne 400E Скачать руководство пользователя страница 144

Страница: 144 / 318

Operating Instructions

Model 400E Ozone Analyzer

Instruction Manual

144

P/N 04316 Rev: B

Table 6-21: iDAS Data Channel Properties

Property

Description

Initial

Setting

Setting Range

NAME

The data channel’s name (for reports and RS-

232 access).

“NONE”

Up to 6 letters and

digits.

TRIGGERING

EVENT

The event that triggers this data channel to

measure and store its data parameters.
See Appendix F for a list of available triggering

events

ATIMER

Any single event

chosen form the

list.

LIST OF

PARAMETERS

A User-configurable list of data types to be

recorded.
See Appendix F for a list of available

parameters.

Only limited by

memory space.

REPORT

PERIOD

The amount of time between each report.

000:01:00

000:00:01 to

366:23:59

(Days:Hours:Min.)

NUMBER OF

RECORDS

The number of reports that will be stored in the

data file.

100

1 to 999,999

(limited by available

storage space)

RS-232

REPORT

Indicates whether or not a report will be printed

automatically to the RS-232 channel.

OFF

OFF or ON

CHANNEL
ENABLED

Provides a convenient means to temporarily
disable a data channel.

OFF or ON

CAL. HOLD

OFF

Disables sampling of data parameters while

instrument is in calibration mode.

OFF

OFF or ON

6.11.3.2.

Data Parameters

Data Parameters are actual types of the data may be measured and stored by the

iDAS. For each of T-API’s instrument models, the list of available data parameters is

set and non-customizable (see Appendix F for a list of available Data Parameters for

this instrument).

Most data parameters have measurement units associated with them, such as mV,

PPB, cc/m, etc., although some have no units. The iDAS is not designed to permit

these units to be changed.

Each Data Parameters has user-configurable functions that define how the data is

recorded.

Содержание 400E































































































































































































































































































































Результаты поиска

Содержание 400E

Отзывы:

Teledyne 400E, Инструкция по эксплуатации, Страница: 144 / 318

Результаты поиска

Содержание 400E

Отзывы: