manualshive.com logo in svg

Teledyne 400E, Инструкция по эксплуатации, Страница: 13 / 318

Поделиться
Скачать
Teledyne 400E Скачать руководство пользователя страница 13

Model 400E Ozone Analyzer 
Instruction Manual 

M400E DOCUMENTATION 

 

P/N 04316 Rev: B 

 

13 

 

1.

 

M400E DOCUMENTATION 

T-API is pleased that you have purchased the Model 400E Ozone Analyzer. 

The documentation for this instrument is available in several different formats: 

1.

 

Printed format. 

2.

 

Electronic format on a CD-ROM. 

 

The electronic manual is in Adobe Systems Inc. “Portable Document Format”. 

The PDF reader software can be downloaded from the Internet at 

www.adobe.com. 

The electronic version of the manual has many advantages: 

Keyword and phrase search feature. 

Figures and Tables are linked so that clicking on the Figure number will display 

the associated graphic. 

A list of Chapters and Sections are displayed at the left of the text. 

Entries in the Table of Contents are linked to the corresponding locations in 

the manual. 

Links embedded in the manual will take you to the corresponding location on 

the internet if the computer used for viewing is connected to the internet. 

Ability to print sections (or all) of the manual. 

3.

 

Additional documentation for the Model 400E Ozone Analyzer is available from 

T-API’s website at 

http://www.teledyne-api.com/manuals

. 

APIcom Software Manual p/n 03945 

RS-232 Manual p/n 01350 

Multidrop Manual p/n 01842 

Содержание 400E































































































































































































































































































































Отзывы:

Нет отзывов