Teledyne 400E Скачать руководство пользователя страница 163

Страница: 163 / 318

Model 400E Ozone Analyzer
Instruction Manual

CALIBRATION PROCEDURES

P/N 04316 Rev: B

163

CALIBRATION PROCEDURES

This section contains a variety of information regarding the various methods for

calibrating a Model 400E Ozone Analyzer as well as other supporting information.

For information on EPA Protocol Calibration please refer to Section 8. This section is

organized as follows:

SECTION 7.1 – BEFORE CALIBRATION

This section contains general information you should know before

about calibrating the analyzer.

SECTION 7.2 - MANUAL ZERO/SPAN CALIBRATION

This section describes the procedure for calibrating the instrument with

no Zero/Span Valves installed or if installed, not operating. It requires

that Zero Air and Span Gas be inlet through the SAMPLE port.

SECTION 7.3 - MANUAL ZERO/SPAN CALIBRATION CHECKS

This section describes the procedure for checking the calibrating of the

instrument with no Zero/Span Valves installed or if installed, not

operating. It requires that Zero Air and Span Gas be inlet through the

SAMPLE port.

SECTION 7.4 - MANUAL ZERO/SPAN CALIBRATION WITH ZERO/SPAN VALVE

OPTION INSTALLED

This section describes the procedure for checking or calibrating the

instrument with Zero/Span Valves installed and operating but

controlled manually through the keypad on the Front Panel of the

instrument. This section also includes a section on activating the

Zero/Span Valves via the Control In contact closures of the analyzers

External Digital I/O.

SECTION 7.5 - MANUAL ZERO/SPAN CALIBRATION CHECK WITH ZERO/SPAN VALVE

OR IZS OPTIONS INSTALLED

This section describes the procedure for checking the calibration of the

instrument with either a Zero Span Valve or IZS Option installed and

operating but controlled manually through the keypad on the Front

Panel of the instrument.

SECTION 7.6 - AUTOMATIC ZERO/SPAN CHECK WITH ZERO/SPAN VALVES

OPTIONS INSTALLED

This section describes the procedure for using the AutoCal feature of

the analyzer to check or calibrate the instrument. The AutoCal feature

requires that either the Zero/Span Valve Option or the Internal

Zero/Span (IZS) Option be installed and operating.

Содержание 400E































































































































































































































































































































Результаты поиска

Содержание 400E

Отзывы:

Teledyne 400E, Инструкция по эксплуатации, Страница: 163 / 318

Результаты поиска

Содержание 400E

Отзывы: