Tecnoalarm TP16-256, Руководство по установке

Страница: 84 / 248

Set-up Installer Manual - TP16-256
3-4
The menu bar from the left to the right:
Options (Ver.)
z
Automatic wiring - Manual wiring
z
Advanced programming level (check to enable)
Zone configuration tables
z
Creation of the zone list (free association of physical to logical inputs)
z
Zone configuration (detector and zone type etc.)
z
Zone-function association (siren, PGM output, by-pass, coinciding zones, chime, non-
excludable zones, common zones)
z
Programming of the programs (program name and zone association)
z
Programming of the consoles (enabling/disabling of quick arming/disarming, release of panic
alarm, quick menu, chime, volume setting, enabling/disabling of voice report, led-program
association and message scheduling)
z
Programming of the keypoints (led-program association)
z
Programming of the system options (buzzer, wireless section supervision, enabling/disabling
of voice report, program-alarm outputs association, key zone settings etc.)
z
Programming of the outputs (output-function association, programming of functioning logic)
Telephone configuration tables
z
Programming of the channels (channels A...H, call back numbers, GSM module, channel block etc.)
z
Programming of the report codes and channel-alarm association
z
Programming and recording of the opening message
z
Programming of the remote controls
Timer configuration tables
z
Programming of the time parameters (entry time 1/2, exit time, activation delays, alarm times etc.)
z
Programming of the 16 timers (frequency, timer-program association) and the test call
z
Programming of the 8 access periods (frequency, association of the codes, keys and wireless keys
to the access periods)
z
Customization of the biennial calendar (the year in course and the following year).
Code programming tables
z
Programming of max. 200 user codes + master code (name, code, type, program-code association,
programming of the attributes)
z
Programming of max. 64 user keys (name, type, program-code association, programming of the
attributes)
z
Programming of max. 60 wireless keys (name, function-key association, programming of the
attributes)
Wireless configuration table
z
Programming of the 4 wireless sirens (sounding time, activation delay, flashing time, volume, siren
mode, functioning mode)
Advanced programming tables (if enabled in the Ver. menu) - special license required
z
Creation of a library of events and operations
z
Event-operation association
z
Programming of the supplementary telephone index
Event log viewing
z
Viewing, printout and saving as a txt-file of the events relating to the system viewed with indication of
date and time and description
Hardware configuration
z
Adding and cancelling of hardware to/from the configuration viewed.
Planimetric map configuration - special license required
z
Creation or importation and management of floor plans
Functions available with the control panel connected
RF-Monitor
z
Graphic software utility for the analysis of the radio frequencies received inside the protected area
(at 433MHz and at 868MHz)
Remote keypad
z
Viewing of a virtual console to facilitate programming by PC
Backup/restore of the wireless configuration
z
Backup (saving of the data relating to the wireless section)
z
Restore (recovery of the data relating to the wireless section)
Opening message
z
Transmission and listening of the opening message
Firmware/vocabulary upgrade
z
Upload of the new firmware and vocabulary versions