Tecnoalarm TP16-256, Руководство по установке

Страница: 7 / 248

TP16-256 - Installer Manual Index 3
2G.3.2 Synchronization of the code 2G-5
2G.3.3 Battery 2G-5
2G.4 LCD300 WL WIRELESS CONSOLE 2G-6
2G.4.1 Electronic board 2G-7
2G.4.2 Dip-switch settings 2G-7
2G.5 SAEL 2000 WL WIRELESS SIREN 2G-8
2G.5.1 Battery 2G-8
2G.5.2 Electronic board 2G-9
2G.5.3 Dip-switch settings 2G-9
3. SETUP
3.1 DRAFT OF THE INSTALLATION ON PAPER 3-1
3.2 HARDWARE CONFIGURATION BY PC 3-1
3.2.1 Addition or deletion of modules 3-7
3.3 INSTALLATION 3-10
3.3.1 Connection of the modules via serial bus RS485 3-10
3.3.2 Programming of the addresses of the modules 3-12
4. PROGRAMMING BY PC
4.1 ZONE CONFIGURATION 4-1
4.1.1 Zone list and zone parameters 4-2
4.1.2 Zone-function association 4-7
4.1.3 Zone-programm association 4-8
4.1.4 Consoles 4-9
4.1.5 Keypoints 4-11
4.1.6 System options 4-12
4.1.7 Outputs 4-15
4.1.8 Bus sirens 4-16
4.2 CONFIGURATION OF THE TELEPHONE SECTION 4-18
4.2.1 Telephone channels and general telephone parameters 4-18
4.2.2 Telephone communicator with GSM module 4-22
4.2.3 Report codes 4-23
4.2.4 Opening message - Vocabulary 4-24
4.2.5 Remote controls 4-26
4.3 CONFIGURATION OF THE TIME PARAMETERS 4-27
4.3.1 Time settings 4-28
4.3.2 Timers 4-29
4.3.3 Access periods 4-31
4.3.4 Customization of the calendar 4-33
4.4 PROGRAMMING OF THE CODES, KEYS AND WIRELESS KEYS 4-35
4.4.1 Programming of the codes 4-35
4.4.2 Programming of the keys 4-37
4.4.3 Programming of the wireless keys 4-39
4.5 CONFIGURATION OF THE WIRELESS SIRENS AND CONSOLES 4-41
4.5.1 Configuration of the wireless sirens 4-41
4.5.2 Configuration of the wireless consoles 4-42
4.6 ACCESS TO THE ADVANCED PROGRAMMING LEVEL 4-44
4.7 SAVING OF SYSTEM CONFIGURATION 4-45
4.8 UPLOAD/DOWNLOAD OF SYSTEM CONFIGURATION 4-45
4.8.1 Connection of the PC to the control panel 4-45
4.8.2 Upload (send) configuration 4-45
4.8.3 Indicators of system configuration coherence 4-48
4.8.4 Download (receive) configuration 4-48