Tecnoalarm TP16-256, Руководство по установке

Страница: 231 / 248

TP16-256 - Installer Manual Special Procedures - Appendix B
B-3
B.1 SPECIAL PROCEDURES
B.1 RESET OF THE DEFAULT CODES
When the control panel is in stand-by (date and time viewed), to reset the default
codes, procede as follows:
z
Remove the jumper JP1.
z
Insert the jumper JP6 on the CPU board for approx. 1 second.
z
Remove the jumper JP6.
z
When the firmware version of the system will be viewed, press the EXIT key at
least twice.
On the display will be viewed
Code Deleted .
z
Reinsert the jumper JP1.
On the display reappears date and time signaling.
B.2 COMPLETE DELETION OF SYSTEM
CONFIGURATION (RESET OF DEFAULT
SETTINGS)
When the control panel is in stand-by (date and time viewed), to reset the default
configuration, procede as follows:
z
Remove the jumper JP1.
z
Insert the jumper JP6 on the CPU board for approx. 1 second.
z
Remove the jumper JP6.
z
When the firmware version of the system will be viewed, press the star key
(
*
NO ) at least twice.
On the display will be viewed Config. Deleted .
z
Reinsert the jumper JP1 on the CPU board.
On the display reappears date and time signaling
(c) Tecnoalarm
TP256 v.2.1 ENG
Code
Deleted
Tue 19 JUN 07
Work. 10 : 45
(c) Tecnoalarm
TP256 v.2.1 ENG
Config.
Deleted
WARNING
The reset of the default codes will affect all the codes of the system as well as the code length:
z
Default installer code 54321
z
Default master code 12345
z
Default standard user codes 00000 (unvalid code)
z
Default code length 5 digits
WARNING
After the deletion of the system configuration, the control panel will be set with all the default settings
(i.e. no telephone number, no zone configuration, no function programmed) and the default codes as
as well as the default code length:
z
Default installer code 54321
z
Default master code 12345
z
Default standard user codes 00000 (unvalid code)
z
Default code length 5 digits
Tue 19 JUN 07
Work. 10 : 45
Tue 19 JUN 07
Work. 10 : 45
Tue 19 JUN 07
Work. 10 : 45