Tecnoalarm TP16-256, Руководство по установке

Страница: 148 / 248

Programming by Console Installer Manual - TP16-256
5-8
• RDV
[ # ]
function active
[ ] function not active
• AND
[ # ]
function active
[ ] functionning in OR
• AM filter
Settings: very or little sensitive
• Enab. AM IR
[ # ]
function active
[ ] function not active
• Enab. AM MW
[ # ]
function active
[ ] function not active
• Enab. FAIL
[ # ]
function active
[ ] function not active
• Enab. LED
[ # ]
function active
[ ] function not active
• Always active
[ # ]
function active
[ ] function not active
• Tamper disabled
[ # ]
Tamper disabled
[ ] Tamper enabled
For the EXPLORER BUS barriers the following parameters are definable:
•
Sensitivity
Defines the sensitivity of the barrier.
Settings: very sensitive, sensitive, normal, hard, very hard.
• Delay
Settings: 1, 3, 5, 6 milliseconds and 1 second
• Enab. FAIL
[ # ]
Signaling active
[ ] Signaling not active
• Enab. TX
[ # ]
function active
[ ] function not active
• AM always active
[ # ]
Always active
[ ] program inserted only
• Channel
Settings: 1, 2, 3, 4
• AM Delay
Defines the duration time of the control masking
Settings: 10, 30, 60 seconds.
For the BEAMTOWER barriers the following parameters are definable:
•
Active beams
Defines the masking of the beams of the barrier.
Settings: Beam 1, beam 2 ..... beam 8
• Detect. mode
Settings:
1 beam x Ta,
2 beams x Ta, 2x Ta or 1x1S, 2x Ta or 1x2S, 2x Ta or 1x5S
3 beams x Ta, 3x Ta or 1x1S, 3x Ta or 1x2S, 3x Ta or 1x5S
4 beams x Ta, 4x Ta or 1x1S, 4x Ta or 1x2S, 4x Ta or 1x5S
1x Ta - Lower Beams (1,2) Tax2, 1xTa - Lower Beams (1,2) Tax4,
1x Ta - Lower Beams (1,2) Tax8
• Ta time
[ # ]
Signaling active
[ ] Signaling not active
• MASK time
Defines the delay of release of antimasking alarm
Settings: disabled, 3 sec., 30 sec., 120 sec.