Tecnoalarm TP16-256, Руководство по установке

Страница: 129 / 248

TP16-256 - Installer Manual Programming by PC
4-37
will be armed in any case, and if there are open zones, the alarm will be released.
z
Disabling access to remote controls
If checked, the user will
not be entitled to arm or disarm the programs associated at distance by remote controls.
Repeat the procedure for all the user codes (1 to 200).
Once you have finished programming of the codes, press:
z
OK to confirm and close the code configuration tables
z
Abandon to undo programming and close the code configuration tables
4.4.2 PROGRAMMING OF THE KEYS
Open the code configuration tables and select the key configuration window by clicking on the tab Keys .
On the screen is viewed:
The key configuration window permits:
z
Programming of the key name
z
Association of the functions
z
Association of the programs
z
Programming of the attributes of the keys
SELECTION OF THE KEY
Select the item next to Key and scroll down the list.
PROGRAMMING OF THE KEY
For every key the following parameters can be programmed:
z
Name or description (max. 16 caracters).
z
Type, i.e. the function that is initiated upon introduction of
the key into the key reader (arming/disarming or by-pass).
KEY-PROGRAM ASSOCIATION
The key will only be enabled to act on (arm/disarm or partset)
the programs associated (1 to 32).
To associate a program to the key click on the corresponding
item. The program number will be shown as a confirmation of
the association.