Tecnoalarm TP16-256, Руководство по установке

Страница: 191 / 248

TP16-256 - Installer Manual Control by Console
6-11
6.3 BY-PASS
When the control panel is armed, it is possible to deactivate temporaneously part of
the system. Upon activation of the by-pass, the zones enabled for by-pass and
included in the program/s armed and partset are deactivated. The other zones are not
affected.
The exclusion of zones persists until deactivation of by-pass or disarming of the
programs they are included in.
6.3.1 ACTIVATION OF BY-PASS WITH CODE
Enter a code enabled for by-pass (master or standard user code enabled for the
programs armed) followed by the number of the program to be partset, e.g.:
+
66778
+
12
On the display is viewed Act. by-pass followed by the program partset.
For the time the by-pass is active the corresponding program LED is blinking.
6.3.2 AUTOMATIC ACTIVATION OF BY-PASS
The control panel can be partset automatically using the 32 timers. Therefore, it is
possible to schedule by-pass with a determined frequency and at a determined time
acting on determined programs.
At the time programmed the timer partsets the programs associated.
6.3.3 ACTIVATION OF BY-PASS DURING THE ACCESS
PERIODS
It is possible define up to 8 access periods of the codes. As a consequence the codes
are enabled for by-pass during the access periods associated by the installer or
holder of the master code only.
6.3.4 DEACTIVATION OF BY-PASS WITH CODE
Enter a code enabled for by-pass (master or standard user enabled for the programs
armed) followed by the number of the program to be reactivated in its integrity, e.g.:
+
66778
+
1
On the display is viewed Deact. by-pass followed by the program to be reactivated in
its integrity.
The LED of the program previously partset becomes lit.
6.3.5 AUTOMATIC DEACTIVACION OF BY-PASS
The by-pass can be deactivated automatically using the 32 timers. Therefore, it is
possible to schedule deactivation of the by-pass with a determined frequency and at a
determined time acting on determined programs.
At the time programmed the timer deactivates the by-pass and reactivates the
programs associated in their integrity.
WARNING OF AUTOMATIC ARMING
At the time and for the period of time programmed by the installer on the display is
viewed a warning of imminent automatic arming and blink the yellow program LED on
the console.
According to programming, the buzzers of the consoles are activated, too.
Act. by-pass
Program 1
Deact. by-pass
Program 1
Arming
Automatic
WARNING
The zones excluded are those associated to the by-pass function and included in the program/s
selected.
WARNING
Outside the access periods associated the codes are not accepted by the control panel and any
attempt at acceding to the system will have no effect.
When trying to do so, on the display is viewed
ACCESS ! DENIED ! .