Tecnoalarm TP16-256, Руководство по установке

Страница: 49 / 248

TP16-256 - Installer Manual Console - Hardware
2B-3
2B.1.3 INSTALLATION
Fix the console to the wall by using the srew holes in the
bottom of the casing.
The combined tamper switch (against opening and
detachment) is positioned on the rear of the electronic board.
Using the screw included, fix the plastic rectangle to the wall
(see opposite figure) without breaking it off the bottom of the
casing. Insert the electronic board into the ABS casing in a
way that the tamper switch is positioned exactly above the
plastic rectangle.
INSERTION OF THE PROGRAM LABEL
The semitransparent label once you have written the program
names on it must be delicately inserted by the slit in the lower
part of the console, just above the hinges of the keypad
protection lid.
WARNING
Do not remove the plastic rectangle from the
bottom of the casing.