Tecnoalarm TP16-256, Руководство по установке

Страница: 180 / 248

Programming by Console Installer Manual - TP16-256
5-40
5.22.5 VIEWING OF THE FIRMWARE VERSION
On initiation, on the display is viewed the release and the language of the firmware of
the control panel.
Commands available
+
EXIT to quit the submenu
5.22.6 VIEWING OF THE VOCABULARY VERSION
On initiation, on the display is viewed the release and the language of the vocabulary
of the control panel.
Commands available
+
EXIT to quit the submenu
5.22.7 VIEWING OF THE LED STATUS
On initiation, all the LED on the console are lit and the buzzer is activated.
Commands available
+
EXIT to quit the submenu
5.22.8 VIEWING OF THE FIRMWARE VERSION OF THE
GSM COMMUNICATOR
On initiation, on the display is viewed in sequence:
z
The status of the GSM telephone communicator
z
The GSM signal power:
*
insufficient
** bad
*** reasonable
**** good
***** optimum
z
The firmware version of the GSM telephone communicator
On initiation, on the display is viewed the release and the language of the firmware of
the control panel.
Commands available
+
EXIT to quit the submenu
(c) Tecnoalarm
TP256 v.1.2 ENG
Test 6
Vocal synthesis
(c) Tecnoalarm
Vocab. v.0.2 ENG
Test 7
LED console
LED console
Test 5
Version
Test 9
GSM
GSM
Device OK
GSM
Signal
*****
GSM
Ver. 1.5
WARNING
During the test, the GSM telephone communicator must be connected to the control panel through
the serial line.