Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 30 / 296

1-2 Netra CT Server Service Manual • February 2007
1.1 Tools Required
You need the following tools to install, remove, or replace components in a Netra CT
server:
■
No. 1 Phillips screwdriver
■
No. 2 Phillips screwdriver
1.2 Attaching the Antistatic Wrist Strap
Most field-replaceable units have sensitive electronic components that require
antistatic precautions.
1. Get the antistatic wrist strap and electrostatic discharge mat from the shipping kit.
2. Place the electrostatic discharge mat close to the system.
3. Unwrap the first two folds of the wrist strap and wrap the adhesive side firmly
against your wrist.
4. Peel the liner from the copper foil at the opposite end of the wrist strap, and
attach the copper end of the strap to a bare metal area on the Netra CT server or on
the chassis, as shown in
FIGURE 1-1
.