Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 95 / 296

Chapter 5 Hot-Swap Software Commands 5-7
5.2.3.1 Determining the Current Hot-Swap State
To determine the current hot-swap state for the I/O slots, as superuser, enter:
For a Netra CT 810 server, output similar to the following is displayed:
■
If you see
value ’basic’
underneath the
default-hotswap-mode
line, then
all of the I/O slots in the Netra CT server are set to basic hot-swap. The entry
value ’disabled’
is shown for every I/O slot in the system in this state.
# prtconf -v -P
cphsc, instance #0
System properties:
name=’instance’ type=int items=1
value=00000000
name=’default-hotswap-mode’ type=string items=1
value=’full’
Driver properties:
name=’AL-8-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’IO-7-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’IO-6-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’IO-5-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’IO-4-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’IO-3-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’IO-2-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’CPU-autoconfig’ type=string items=1 dev=none
value=’enabled’
name=’hotswap-mode’ type=string items=1 dev=none
value=’full’