Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 22 / 296

xxii Netra CT Server Service Manual • February 2007
How This Book Is Organized
Part 1 “Preparing for Service ”
■
Chapter 1 describes the procedures you must perform before installing, removing,
or replacing field-replaceable units (FRUs) in a Netra CT server.
■
Chapter 2 provides hardware and software procedures for powering the Netra CT
server on and off.
■
Chapter 3 provides instructions for handling Compact PCI (cPCI) boards and
assemblies correctly.
Part 2 “Troubleshooting the System ”
■
Chapter 4 provides troubleshooting procedures for the Netra CT server.
Part 3 “Replacing Hot-Swappable FRUs ”
■
Chapter 5 describes hot-swap software commands.
■
Chapter 6 gives instructions for removing and replacing hot-swappable boards.
■
Chapter 7 contains instructions for removing and replacing hard drives and
removable media.
■
Chapter 8 gives instructions for removing and replacing hot-swappable
subassemblies.
Part 4 “Replacing Cold-Swappable FRUs ”
■
Chapter 9 provides instructions for removing and replacing the Netra CT 810
server and Netra CT 410 server.
■
Chapter 10 gives instructions for removing and replacing cold-replaceable
subassemblies.
Part 5 “Illustrated Parts List ”
■
Chapter 11 gives the illustrated parts list for the Netra CT server.
Part 6 “Appendixes, Glossary, and Index ”
■
Appendix A lists the connector pinouts for boards in the Netra CT server.
■
Appendix B provides instructions for connecting a terminal console to the server.
■
Appendix C gives the error messages for the Netra CT server.
■
Appendix D gives the system specifications for the Netra CT server.