Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 180 / 296

9-2 Netra CT Server Service Manual • February 2007
9.1 Removing a Server
The instructions in this section cover the following situations:
■
Removing a failed server
■
Removing a functioning server so that you can access a component behind the
server, such as a power distribution unit or cable
1. Completely power off the Netra CT server.
See Section 2.3, “Powering Off the Server” on page 2-7 for instructions. You must
push the purple power supply unit locking mechanism into the unlocked position
before you can remove the server.
2. Disconnect the power cables from the appropriate connectors.
A Netra CT 810 server has two power supply units; you must disconnect two power
cables when removing a Netra CT 810 server.
FIGURE 9-1
shows sample server configurations. You do not have to disconnect the
power cables from any connectors other than the ones supplying power to the server
that you want to remove; doing so powers off other servers in the chassis.