Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 147 / 296

Chapter 7 Removing and Replacing Hard Drives and Removeable Media 7-9
9. Verify that the hard drive is activated.
As superuser, enter:
Output similar to the following is displayed:
Note that in the output, the Type column for the upper hard drive
(
c0::dsk/c0t0d0
) is now
disk
, and the Occupant column shows it as
configured
.
Also, you can use the hard drive (HDD) LEDs on the system status panel to verify
that the hard drive is activated (
FIGURE 7-1
). When the Okay to Remove LED ( )
on the system status panel for the hard drive is OFF, the hard drive is activate.
10. If your hard disks are under the control of RAID software, perform the necessary
steps to bring the disks online.
11. Perform any other necessary software procedures on the hard drive to bring it
online, including mounting the partitions and creating file systems.
# cfgadm -a c0
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t6d0 CD-ROM connected configured unknown