Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 188 / 296

9-10 Netra CT Server Service Manual • February 2007
7. Determine if you need to connect the cables to the boards in the server and
reinstall all the components from the server.
■
If you are installing a replacement Netra CT 810 server or Netra CT 410 server, you
must connect all the cables and reinstall all the components that you removed
from the faulty server. Continue with
Step 8 .
■
If you are installing a functioning Netra CT 810 server or Netra CT 410 server that
you had to remove to access a component behind the server, you do not have to
connect the cables and reinstall the components. Skip to Step 10 .
8. Reinstall all the components that you removed from the faulty server.
Replace the following components:
■
Section 7.2.2, “Installing a DVD or DAT Drive” on page 7-13 (Netra CT 810 server)
■
Section 8.1.2, “Replacing the System Status Panel” on page 8-4
■
Section 8.2.2, “Replacing the System Controller Board” on page 8-8
■
Section 8.5.2, “Replacing a Fan Tray” on page 8-21
■
Section 6.1.2.2, “Inserting a Board” on page 6-15
■
Section 10.1.2, “Replacing a Cold-Swappable Hard Drive” on page 10-4
■
Section 10.2.2, “Replacing a Cold-Swappable Power Supply Unit” on page 10-8
9. Plug all the cables into the server.
10. Connect the input power cables to the connectors for the replacement server.
11. Power on the server.
See Section 2.1, “Powering On the Server” on page 2-2 for instructions.