Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 149 / 296

Chapter 7 Removing and Replacing Hard Drives and Removeable Media 7-11
■
If you have a DVD drive installed in your server, output similar to the following
is displayed:
In the sample output, the attachment-point ID for the DVD drive is
c0::dsk/c0t6d0
, shown as
CD-ROM
under the Type column.
■
If you have a DAT drive installed in your server, output similar to the following is
displayed:
In the sample output, the attachment-point ID for the DAT drive is
c0::rmt/0
, shown as
tape
under the Type column.
4. Deactivate the removeable media drive.
As superuser, enter:
where ap_id is the attachment-point ID for the removable media drive that you want
to remove. For example, to deactivate the DVD drive using the sample output, you
would enter:
Note that the attachment-point ID would be different for the DAT drive.
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t6d0 CD-ROM connected configured unknown
c0::rmt/0 unavailable connected unconfigured unknown
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t6d0 unavailable connected unconfigured unknown
c0::rmt/0 tape connected configured unknown
# cfgadm -c unconfigure
ap_id
# cfgadm -c unconfigure c0::dsk/c0t6d0