Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 39 / 296

Chapter 2 Powering the Server Off and On 2-5
FIGURE 2-3
System Power Button and System Power LED Locations (Netra CT 810
Server)
FIGURE 2-4
System Power Button and System Power LED Locations (Netra CT 410
Server)
4. Verify that the system power LEDs on the system status panel is on, indicating
that the system is completely powered on.
FIGURE 2-3
shows the system power LED location for the Netra CT 810 server, and
FIGURE 2-4
shows the system power LED location for the Netra CT 410 server.
5. Verify that the green power ( ) LED on the power supplies are on, not blinking,
indicating that they are powered on and functioning properly.
6. Connect to the console and boot the server.
See Appendix B for instructions on connecting a terminal to your server, if necessary.
System power
button
System power
LED
System power
button
System power
LED