Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 144 / 296

7-6 Netra CT Server Service Manual • February 2007
Note that in the sample output, the Type column for the upper hard drive
(
c0::dsk/c0t0d0
) is now
unavailable
, and the Occupant column now shows it
as
unconfigured
.
Also, you can use the hard drive (HDD) LEDs on the system status panel to verify
that the hard drive is deactivated (
FIGURE 7-1
). When the Okay to Remove LED ( )
on the system status panel for the hard drive is ON, you can remove the hard drive
from the slot.
FIGURE 7-1
Locating the Hard Drive LEDs on the System Status Panel (Netra CT 810
Server)
7. Attach the antistatic wrist strap.
See Section 1.2, “Attaching the Antistatic Wrist Strap” on page 1-2 .
8. Locate the drive bay cover on the system.
The hard drives are behind the drive bay cover on your system. A maximum of two
hard drives are behind the drive bay cover in a Netra CT 810 server and only one
behind the drive bay cover in a Netra CT 410 server.
hard drive LEDs
Removable media drive LEDs